In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks that you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the home, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it is actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so you get something which resembles a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak when you place the mask on. Make sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry dogsrecommend.com/dog-mask too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so that you don’t wind up with smudges or smears on your dog.
Then it is time to paste the mask onto your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Make sure that it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged firmly onto the face of your dog. Don’t make the folds too big or else it might look messy. Once you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Be sure that the ears are level and be certain it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask because your dog protection, you will have to do some sanding to make sure that it’s secure on your dog. You can do it by sanding off any excess paper which might have been eliminated from your mask.